Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Torrance Homeowners
A new Gate Installation in Torrance should do two things: hold up to the marine air off the Pacific and open when you press the button, every time. Carver Gate Repair Torrance has installed gates across the South Bay since 2008, and every job runs on The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians on site, and a written guarantee good for a full year. Lonnie Burke leads the crew here in Torrance, and he answers for the work personally. If you’re tired of contractors who quote one number and charge another, call (424) 757-9824. A real person picks up, day or night.
Key Takeaways
- Written price before work starts. The number does not move once the job is open.
- Full-year guarantee on every installation. If something fails inside 365 days, we return free of charge.
- Nine gate-motor brands serviced. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Live-person phone coverage 24/7. Weekends and holidays included.
- Installation work is measured, quoted, and scheduled. We don’t improvise on your driveway.
Styles & brands we work with
Automatic Gate Installation
Automatic Gate Installation means adding a motor and control system to a gate so it opens and closes without leaving your car. In Torrance, where lots on the hill side of town run narrow and driveways slope toward the street, an automatic gate solves a real problem: you stop fighting the incline every time you come home. Carver Gate Repair Torrance handles the full automatic installation, from setting the operator arm to wiring the loop detector that tells the gate when a car is waiting. Most automatic gate installations in Torrance run between $2,800 and $7,500 depending on the motor, gate weight, and whether we’re running new power to the post. We quote the exact number in writing before the first tool comes off the truck.
Operators and Control Boards
We mount the operator and set the limit switches so the gate stops exactly where it should, every cycle. The control board gets programmed for your specific setup, including auto-close timing and safety loop sensitivity. No guesswork, no “it should work” adjustments left for later.
Safety Edge and Loop Detector Wiring
Every automatic gate in Torrance should stop and reverse if it meets resistance, and the loop detector should sense a car before the gate moves. We wire both as standard on automatic installs. Torrance requires safety compliance on automated gates, and we build every system to meet those requirements.
Gate Installation Services
Gate Installation Services at Carver Gate Repair Torrance cover the full job: measuring the opening, pouring or reinforcing posts, hanging the gate, and aligning the hardware so it swings or slides correctly from day one. We see a lot of Torrance homes where a general contractor hung a gate as an afterthought, and the hinges sag within a year. That’s not how we work. A standard single swing gate installation in Torrance typically runs $1,800 to $4,200, and a solid steel Driveway Gate with motor is generally $4,500 to $9,000. The written quote includes all hardware, concrete work, and labor. Nothing gets added at the end.
Post Setting and Reinforcement
The post is what carries the gate, and in Torrance soil near the coast, we dig deeper than code minimum to account for soft ground. We use galvanized steel posts set in concrete at the right depth for the gate’s weight and swing radius. A plumb post means the gate won’t drift out of alignment a year from now.
Hardware Selection and Alignment
Hinges, rollers, tracks, latches. These are the parts that fail first when they’re undersized, and they’re the parts we upgrade on every install. We size hardware to the actual gate weight, not the cheapest option on the shelf, then align everything so the gate moves without dragging or rattling.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation takes a manual gate and puts a motor, control board, and access system on it so it opens from a remote, keypad, or phone app. It’s the right call for Torrance homeowners who want to stay in the car when it’s raining, or who want a barrier between the street and the driveway that actually gets used. We install electric gates from $3,200 to $8,000 depending on whether the gate is new or we’re retrofitting an existing one, the motor brand, and how far we need to run conduit from the panel. The price is written, quoted before work, and it stays written.
Retrofit Kits on Existing Gates
We regularly mount electric operators on gates that were originally manual, as long as the gate itself is square and the hinges are sound. We check the gate weight and post condition before recommending a retrofit, because putting a motor on a sagging gate just burns out the motor. If the gate is worth saving, we save it.
Keypad and Remote Programming
We program keypads, remotes, and vehicle transmitters during the install and show you how to add or remove codes yourself. You shouldn’t need to call a technician every time a family member needs access. We also wire in a manual release so the gate can be opened by hand during a power outage, which matters in Torrance wind events.
Driveway Gate Installation
Driveway Gate Installation is the full process of putting a gate across the entrance to your property, whether it’s a single swing gate, a double swing, or a sliding panel. Torrance driveways vary: some are flat and wide off Anza, others are steep and tight in the hills above PCH. We measure every opening before we quote, because a gate that looked fine on a website might not clear your driveway’s slope or your fence line. Driveway gate installation in Torrance generally runs $3,000 to $9,500 fully installed, including posts, gate, hardware, and motor if you’re going automatic. The free estimate includes a written price you can hold us to.
Single and Double Swing Gates
Swing gates are the most common driveway gate in Torrance, and we install both single-panel and bi-parting double gates. We check the swing radius against your driveway grade and any columns or walls before we order a panel. A gate that hits the ground on a sloped driveway is a problem we catch before it ever becomes yours.
Post and Column Preparation
Some Torrance homes have existing brick or stucco columns; some need new steel posts set in fresh concrete. We can work with either. If you have columns, we verify they’re tied to a solid footing, because a motorized gate pulling on a hollow column will crack it inside a year.
Sliding Gate Installation
Sliding Gate Installation is the right choice when a driveway is steep, short, or tight, because the gate moves sideways instead of swinging into the driveway space. We see this a lot in Torrance neighborhoods where the driveway climbs straight up from the street, and a swing gate simply won’t clear the grade. Carver Gate Repair Torrance installs cantilever and V-track sliding gates from $4,500 to $10,000 depending on gate width, material, and whether we’re adding a motor. A cantilever slide gate costs more up front but doesn’t need a track on the ground, which means no debris jamming the rollers after Santa Ana winds.
Cantilever Sliding Systems
Cantilever gates ride on rollers mounted to posts, with no track running across the driveway opening. That’s a real advantage in Torrance, where leaves, sand, and wind-blown debris build up fast. We set the counterbalance frame so the gate stays level through the entire slide, even at 20 feet wide.
V-Track Systems and Ground Prep
V-track sliding gates run on a steel track set into the driveway, and they’re a good fit for flat approaches where a cantilever frame isn’t practical. We cut and set the track so it sits flush with the drive surface, then anchor it to prevent shifting. A poorly anchored V-track will drift and bind, which is what you’re paying us to avoid.
Gate Opener Installation
Gate Opener Installation mounts and wires the motor that automates a gate, from the operator arm to the control board to the safety inputs. Torrance homeowners call us for this when a gate is already hung and they want automation, or when an old opener has failed and the gate needs a new drive system. Gate opener installation typically costs $1,200 to $3,500 for the opener and labor, with higher-end models like LiftMaster or FAAC running toward the top of that range. We install openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we match the opener to the gate’s actual weight and cycle frequency.
Articulating Arm and Ram Operators
Articulating arm openers work best for swing gates with limited space behind the post, and ram operators suit heavier gates that need steady force through the arc. We assess post clearance and gate weight before recommending one over the other. The wrong operator on a heavy gate fails early and costs you a second service call.
Wiring and Electrical Runs
We handle the power run from your panel to the gate operator, including conduit, breaker, and any low-voltage control wiring for the keypad and safety edges. This is the part of the job that generalists often skip or hand off, and it’s the part that determines whether the gate works for five years or five months. Every run is done to code and checked before we leave.
Gate Fabrication
Gate Fabrication builds a gate to the actual measurements of your Torrance property rather than forcing a pre-made panel into an opening it doesn’t fit. We fabricate steel and aluminum gates to spec, including custom widths, heights, and infill patterns, and we build them to carry the weight of a motor if you ever want to automate later. Custom gate fabrication in Torrance starts around $2,000 for a simple steel Pedestrian Gate and runs $5,000 to $12,000 for a motorized driveway gate built from scratch. The quote is based on the design, material, and finish you choose, and it’s written before we start cutting steel.
Custom Sizes and Materials
Not every Torrance driveway is a standard 12-foot opening. We build gates for odd widths, sloped approaches, and matching fence lines, in steel or aluminum. Aluminum resists the coastal air better, and steel wins on strength for heavy automated panels. We’ll tell you which one fits your situation and why.
Infill and Privacy Options
Privacy slats, pickets, horizontal bars, or full solid panels. We fabricate what you want, and we build in clearance for the motor and safety edges. A gate that looks good but binds against the post at the end of its travel isn’t a finished job, and we don’t call it one.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on LiftMaster gate operators daily, and we stock their most common control boards, remote transmitters, and safety eyes. LiftMaster’s residential and light-commercial line holds up well in Torrance’s coastal climate, and we know the programming sequences cold. When a LiftMaster board fails, we can usually get the gate back online same visit.
We also install and service FAAC and Mighty Mule operators regularly. FAAC hydraulic and electromechanical rams are common on heavier Torrance driveway gates, and Mighty Mule is popular on lighter residential setups. Whether you have LiftMaster, FAAC, Mighty Mule, or any other make, we can help.
Signs You Need a Pro Right Now
- Your gate sags or drags on the ground. This is usually a post or hinge problem, and a motorized gate that drags is putting strain on the operator every cycle. The longer it runs that way, the more expensive the fix gets.
- The gate reverses mid-cycle for no reason. That’s often a safety edge or loop detector starting to fail, or the force settings drifted. It’s not a quirk to live with, and it means the gate isn’t protecting anyone right now.
- The motor runs but the gate doesn’t move. A sheared key, stripped gear, or broken chain inside the operator. Running the motor in that state can burn it out completely.
- You hear grinding or banging when the gate opens. Metal on metal sound means a roller, hinge, or track has worn through. Replacement parts are cheaper than a full gate re-hang, if you catch it early.
- The keypad or remote stopped working after a storm. Torrance gets salt air and occasional lightning, both of which are hard on control boards. Blown boards often leave the gate stuck open or closed, and a stuck-open gate is no gate at all.
Our Process, Step by Step
- 1
We answer the phone. A live person takes your call at (424) 757-9824, any hour, any day. We get your address, ask what the gate is doing, and set an arrival window that we keep.
- 2
We send a background-checked technician. Uniformed, on time, and in a marked van. You know who you’re letting through the gate before they ever touch it. That’s The Garrison Standard, not a courtesy.
- 3
We measure and inspect before we quote. Posts, gate weight, opening width, slope, power availability. We assess the whole picture before we put a number on paper, and we don’t charge for the estimate.
- 4
You approve a written price before we start. The quote line-items the labor, gate, hardware, motor if applicable, and any electrical work. If we find something else inside the job, we stop and show you before adding a dollar.
- 5
We install, test, and clean up. The gate cycles through full open and close, the safety edges and loops get verified, and we walk you through the keypad and controls before we leave. The site is swept, and the old gate or opener is hauled off if you want it gone.
How Much Does Gate Installation Cost in Torrance?
Gate installation in Torrance runs a real range because the work varies by gate type, material, motor, and site conditions. Here’s what we see across the South Bay:
| Installation Type | Typical Cost in Torrance |
|---|---|
| Manual single swing gate | $1,800 – $4,200 |
| Driveway gate with motor | $4,500 – $9,000 |
| Automatic gate (full install) | $2,800 – $7,500 |
| Electric gate (retrofit or new) | $3,200 – $8,000 |
| Sliding gate (cantilever or V-track) | $4,500 – $10,000 |
| Gate opener only (labor + unit) | $1,200 – $3,500 |
| Custom fabricated gate | $2,000 – $12,000 |
What moves the price: gate width and weight, whether we’re setting new posts or working with existing columns, how far we need to run electrical from the panel, and the motor brand you choose. A heavy steel sliding gate with a FAAC operator costs more than a light aluminum swing gate with a Mighty Mule. The way to avoid overpaying is to review Gate Installation pricing and get a written line-item quote, then hold the contractor to it. Our free estimate includes the full scope, the exact price, and the guarantee in writing. Call (424) 757-9824 and we’ll schedule the measure.
Our Service Area Near Torrance
We cover all of Torrance and the surrounding South Bay and Harbor communities, including Redondo Beach, Lomita, Manhattan Beach, Hawthorne, San Pedro, and the Westchester area. We also run installs in Carson, Inglewood, Compton, Lynwood, and Willowbrook. If you’re outside our Torrance gate installation route, check our nearby pages for gate installation in Inglewood or gate installation in Carson. Same-week scheduling is typical for most Torrance installs, and the Carver Gate Repair home page has our full service breakdown.
Serving Torrance, CA - Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Torrance
Gate installation is the complete process of setting posts, hanging a gate, aligning hardware, and optionally adding a motor and access system so the gate operates correctly from day one. In Torrance, that includes accounting for coastal soil, driveway slope, and wind exposure. At Carver Gate Repair Torrance, every installation ends with a written guarantee good for a full year.
Most standard gate installations take one full day on site, including post setting, gate hanging, and motor wiring if applicable. Custom fabricated gates run one to two weeks for fabrication plus one day for install, since the gate is built to your measurements. We give you a timeline in writing when you approve the quote.
A manual single swing gate typically runs $1,800 to $4,200, and a motorized driveway gate runs $4,500 to $9,000 in Torrance. Sliding gates and custom fabrication run higher because of the materials and labor involved. Your quote is free, written, and itemized before any work starts. Call (424) 757-9824 to schedule a measure.
Yes, we install and service LiftMaster, FAAC, Mighty Mule, plus BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Our technicians are trained on all nine brands and we stock common OEM parts for each. We match the operator to the gate’s weight and cycle frequency, not the other way around.
If your gate is stuck open or blocking your driveway, we treat it as a priority and dispatch a technician as fast as the schedule allows, any day of the week. The phones are answered by a live person 24/7, so you’re not leaving a message and hoping. Call (424) 757-9824 and we’ll get someone moving.
Every installation carries a written guarantee covering the full year from the date of service. If the gate, motor, or hardware fails inside that window due to our workmanship, we return and fix it free of charge, no argument. It’s in writing on every job, and it’s the same guarantee on every installation we do in Torrance.
Clear the driveway area and the gate opening so we have working room, and move any vehicles out of the way. Have your property line information available if the gate is going near the boundary, and let us know if you have an HOA with gate restrictions. We handle permits and code compliance from there.
Schedule Your Gate Installation Service in Torrance Today
Call (424) 757-9824 for a free, no-obligation measure and written estimate on your gate installation. We’ll send a background-checked technician to your Torrance home, give you an itemized price in writing, and install the gate to The Garrison Standard. Live-person phone coverage, 24 hours a day, seven days a week. Call now and get a real answer from a real person.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance, serving Torrance since 2008.