Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lynwood, CA
Carver Gate Repair handles gate repair, installation, and motor work across Lynwood, CA, with a process built around written prices and defined arrival windows. Lynwood’s housing stock runs heavily to 1940s and 1950s bungalows and small apartment buildings, many with original wrought iron gates on short driveways. The semi-arid climate and alluvial soil under the city create a specific set of problems: settling frames, sagging hinges, and metal that expands and contracts harder than it does near the coast. If you need a gate company in Lynwood, call (424) 757-9824.
Why Lynwood Homes Are Different
Lynwood sits on alluvial soil that shifts over time, and the homes built here between the 1930s and 1960s sit directly on top of it. That means gate posts lean, hinges sag, and frames that lined up perfectly sixty years ago now bind against the latch. On the numbered streets east of Long Beach Boulevard, many gates are original to postwar construction, with thin-gauge steel that was never designed for the torque of an automatic opener. When a motor gets retrofitted without reinforcing the frame, the gate warps within a season or two.
The climate adds another layer. Hot, dry summers followed by Santa Ana wind events push gate metal through repeated expansion and contraction cycles. Welds crack. Paint splits. Rollers wear unevenly. A gate that operates fine in March may drag by August. We factor that into every repair: if the frame has shifted, we correct the geometry before installing new hardware, because replacing a hinge on a misaligned gate just moves the failure point somewhere else.
Styles & brands we work with
Our Main Lynwood Services
Here are the three services Lynwood homeowners call us for most often, each with its own page covering local conditions, pricing, and timelines in detail.
Gate Repair in Lynwood
Most Lynwood repair calls start the same way: a gate that won’t close, drags on the driveway, or makes a grinding noise the homeowner has been ignoring for weeks. On older wrought iron gates, sagging hinges and cracked welds are the usual culprits. Our technicians reinforce the frame before hanging new hardware, and every repair is quoted in writing before work begins. Gate Repair in Lynwood covers the full scope, from hinge replacement to frame straightening.
Gate Installation in Lynwood
New gate installation in Lynwood means working around short driveway setbacks and older concrete that may not have footings rated for a heavy automated gate. We measure the driveway, check the soil conditions, and specify a gate that fits the existing structure rather than forcing a standard size into place. If an automatic opener is going on an older steel gate, we reinforce the frame so the motor doesn’t twist it. Gate Installation in Lynwood walks through what a full install includes.
Gate Motor Repair in Lynwood
Gate motor failures in Lynwood fall into predictable patterns: limit switches that drift after years of heat exposure, loop detectors that stop sensing vehicles, and articulating arms that bind on warped gates. The work requires diagnosing the motor, the control board, and the gate geometry together. Our technicians work on LiftMaster, FAAC, Elite, and Mighty Mule systems, among others. Gate Motor Repair in Lynwood breaks down common failures by brand and symptom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lynwood
Carver Gate Repair technicians work on nine gate-motor brands, including LiftMaster, FAAC, Mighty Mule, and Elite. We stock common control boards, limit switches, and remote transmitters for these systems, which keeps turnaround on most Lynwood repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lynwood, CA
| Service | Typical range in Lynwood |
|---|---|
| Gate hinge replacement (pair) | $180 – $340 |
| Weld repair, single crack | $120 – $250 |
| Frame straightening and reinforcement | $300 – $600 |
| Gate wheel or roller replacement | $90 – $180 |
| Latch and lock replacement | $110 – $220 |
| Single swing gate installation | $2,400 – $4,800 |
| Double swing gate installation | $4,500 – $9,000 |
| Slide gate installation | $3,800 – $8,200 |
| Gate motor replacement (swing) | $1,100 – $2,600 |
| Control board replacement | $450 – $900 |
| Loop detector repair or replacement | $300 – $600 |
| Remote transmitter programming | $85 – $160 |
In Lynwood, frame realignment is the most common reason a quote lands higher than a homeowner expects. Older gates on shifting soil need structural work before new hardware goes on, and skipping that step means the repair won’t hold. Every price is written down and agreed to before any work starts, and it does not change at the door.
Neighborhoods We Serve in Lynwood
We cover all of Lynwood, from the residential blocks east of Long Beach Boulevard to the apartment corridors near Martin Luther King Jr. Boulevard and the neighborhoods around the 105 freeway. Typical response time for a gate repair call in the city is same-day or next-morning, depending on the nature of the job.
- Lynwood Gardens
- Central Lynwood
- Neighborhoods east of Long Beach Boulevard
- Areas near Plaza Mexico
- North Lynwood, bordering the 105
Service Area – Cities Near Lynwood
Carver Gate Repair serves Lynwood and the surrounding cities in southern Los Angeles County. If you’re in Compton, CA, Carson, CA, Hawthorne, CA, or Inglewood, CA, we dispatch the same background-checked crews and honor the same written guarantee.
Serving Lynwood, CA - Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynwood
We typically reach Lynwood homeowners the same day or the next morning. Scheduling is coordinated from our Los Angeles office, and a live person answers the phone around the clock. Call (424) 757-9824 and you’ll get an arrival window, not a voicemail box.
Most straightforward gate replacements on existing footings don’t require a permit, but automatic gates with new electrical runs may. We’ll tell you what applies to your property during the estimate, and factor any permit work into the written price before you commit.
Every repair from Carver Gate Repair carries a written guarantee good for a full year from the date of service. If the repair fails inside that window, we return and fix it at no charge. No argument, no invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lynwood Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.