Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lomita
Gate installation in Lomita runs $1,800 to $7,500 for most residential projects, with custom fabrication and opener work adding to that range depending on your gate opening, material, and automation needs. We dispatch crews to Lomita daily from our Los Angeles coordination office, and most installs are quoted, scheduled, and completed within one to two weeks. If you need a straight answer on what your gate will cost before anyone touches your property, call (424) 757-9824. The price we quote is the price on the written estimate, agreed before work starts.
Lomita is not Torrance or Carson when it comes to gates. The city’s fence and sign ordinances are stricter than anything around, and the marine layer off the Pacific eats hardware faster than homeowners expect. We know both of those things, because we work here. The crew that shows up at your house has already dealt with Lomita’s setback requirements, its 1950s post spacing, and the salt-air rust that comes with living two miles from the water. That local knowledge is the difference between a gate that passes inspection the first time and one that gets flagged for being six inches too close to the sidewalk.
Why Carver Gate Repair Torrance Is Lomita’s Preferred Gate Installation Company
Homeowners in Lomita call us because the process is predictable. Every job starts with a written price, delivered before any work begins. That number does not move at the door. The technician who arrives is background-checked, uniformed, and employed to Gate Installation standards, not general contracting. We do not send a different subcontractor depending on the day. The person you meet is the person doing the work.
Lonnie Burke runs the operation to The Garrison Standard, the process we have followed since 2008. That means a written guarantee on every repair, good for a full year. If the repair fails inside that year, the second visit is free. No argument, no re-quote, no charge. That guarantee is in writing, on every job, including installs that involve openers, loops, safety edges, and custom steel work. Call our live phone line at (424) 757-9824 any time, day or night. A real person answers. No voicemail queue, no call-back promise that never comes.
Lomita customers tell us the same thing: they have been burned by no-shows and moving prices before. We built the process to end that. The Garrison Code covers arrival windows, written pricing, clean job sites, and a full-year guarantee. No fine print. No upsells. Just the work, done correctly, at the price we agreed on.
Styles & brands we work with
Gate Opener Installation in Lomita
Gate opener installation in Lomita typically costs $1,200 to $3,800, depending on the operator model, gate weight, and whether we are adding safety devices or replacing existing controls. The job involves mounting the operator, running power to the unit, setting limit switches, wiring photo-eyes and loop detectors, and testing the full cycle under load. A gate opener is not a bolt-on accessory. On a coastal property in Lomita, it has to be specified for the salt air, the gate’s actual weight (not the manufacturer’s optimistic estimate), and the travel geometry of your existing opening.
Most Lomita homes built between the 1940s and 1970s have gate posts that have settled or shifted. That means the operator cannot just be mounted to whatever is there. We check post plumb, footing depth, and hinge condition before we recommend an opener. Sometimes the right answer is a new post or a reinforced bracket. Sometimes it is a different operator class altogether. We will tell you, in plain language, what your gate needs and what it will cost.
Photo-Eye and Safety Edge Compliance
Every automatic gate installed in Lomita must pass UL 325 safety requirements. That means photo-eyes positioned correctly, proper force settings, and, on some gates, physical safety edges. We test every install before we leave. If an inspector asks, you will have the documentation. If the gate fails the check, we do not leave it that way. This is non-negotiable under The Garrison Standard.
Salt-Air Operator Selection
Marine layer moisture gets into operator housings and eats circuit boards. We recommend operators with sealed or better-protected control boards for homes west of Western Ave or within a mile of the coast. LiftMaster and FAAC both make units that hold up in this environment. We stock or can quickly source parts for those brands, and our techs are trained on them specifically, not just generically “familiar” with gate openers.
Gate Fabrication in Lomita
Custom gate fabrication in Lomita typically runs $2,400 to $5,200 for a single swing gate, and $4,000 to $9,500 for a double gate, depending on materials, dimensions, and hardware grade. Custom fabrication is not a luxury in this city. It is often the only option. Lomita’s original 1950s gate openings run 3 to 6 inches narrower than standard panel widths sold at big-box stores. That means an off-the-shelf 16-foot gate does not fit the opening you actually have. If you force it, the frame rubs the latch post within a year. We build to your measured opening, not a catalog spec.
The salt air changes the material conversation. Painted mild steel looks fine for about two years, then the rust starts at the drilled holes, the hinge barrels, and the welds. Galvanized steel with hot-dipped brackets and stainless hinge pins lasts far longer near the coast. That spec costs more up front. It costs less than replacing a rusted-through gate in year four. We will show you both prices and let you decide, but we will be honest about what each one means for a Lomita property.
Post Footings for Coastal Soil
Lomita’s soil stays damp from the marine layer, and old footings rot or crack in ways inland footings do not. We set new posts deeper and, where needed, in concrete with proper drainage. For a gate that swings, post plumb and footing mass are the whole game. A leaning post makes the gate drag on the drive instead of closing, and the operator works harder until it burns out. The footing is not the cheap part of the job. Do not let anyone treat it like one.
Stainless Hardware on Every Hinge
The hinge is where gates fail first in Lomita. Bare steel hinge pins rust, the leaf gall grinds them down, and the gate sags. We use stainless steel hinge pins and hot-dipped brackets on coastal installs. If a customer wants to reuse an existing gate, we check the hinge condition first. A gate with a rusted hinge is not worth mounting a $1,500 opener to. The hinge gets fixed or the gate gets replaced. That is how you avoid paying twice.
Trusted Brands We Service in Lomita
We work on LiftMaster, FAAC, and Mighty Mule openers regularly in Lomita, and we maintain training on all nine major brands under The Garrison Standard. That matters because a DoorKing board needs different diagnostics than a LiftMaster, and a FAAC articulating arm has different travel geometry than a Mighty Mule ram. The right parts and the right know-how have to match the system already on your property. We stock common parts locally for Lomita customers and can source the rest quickly. Call (424) 757-9824 with your opener model and we can tell you what we have on hand before you book.
Common Gate Installation Problems We See in Lomita Homes
- Off-the-shelf gates that do not fit the opening. Lomita’s 1950s-era homes rarely have true 16-foot or 12-foot openings. We measure every opening before quoting. If a catalog panel would rub, we tell you and price custom fabrication instead.
- Rust at drilled holes and bare threads. Every fastener on a coastal gate needs to be stainless or re-coated after drilling. We see bare threads turning into rust points by the second winter, especially on gates within a mile of the coast. That rust is structural, not cosmetic.
- Hinge posts cracked by Santa Ana winds. Gusts over 40 mph flex a swing gate until the footing cracks. The post leans, the gate drags, and the opener burns out. A deeper, properly formed footing prevents this. The cheap fix does not.
- Settled posts from the original install. Many Lomita gates built in the 1960s and 1970s sit on shallow footings that have shifted. You cannot hang a new gate on a post that is out of plumb. It will never close right. We check this before quoting, not after the gate is built.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Lomita, CA
Here are real ranges for Lomita, based on the work we do here. A single driveway gate in standard steel runs $1,800 to $3,200 installed. A custom galvanized swing gate runs $2,400 to $5,200. A double driveway gate runs $4,000 to $9,500 depending on width and material. Adding an opener runs $1,200 to $3,800. Pedestrian gates run $900 to $2,200. These are installed prices, not material-only figures. What changes the number: gate width, material grade, post footing condition, opener brand, and how close to the coast you live, because the salt air affects the hardware spec. Every quote is written, free, and fixed before work starts. Call (424) 757-9824 for a free estimate. We will measure, we will explain, and the number we give you is the number on the invoice.
We Also Serve Cities Near Lomita
Our Lomita crews also cover Lomita-adjacent communities including Harbor City, Torrance, Carson, and Rancho Palos Verdes. If you live just over the city line, the same written pricing, the same background-checked techs, and the same full-year guarantee apply. Dispatch is coordinated from our Los Angeles office, so response times stay consistent across the South Bay.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lomita
Because Lomita’s fence and sign ordinances apply to the structure, not your intent. If you replace a gate and it sits closer to the sidewalk than the city allows, or it exceeds the height limit, the inspector can flag it and require correction before you close the permit. We build to Lomita’s setback and height rules on every job, repair included. Call (424) 757-9824 and we can check your gate’s position against current code before you spend anything.
Probably not. Most original Lomita driveways from that era have openings that run 3 to 6 inches narrower than the standard panel width. You either shim and stress the frame until it rubs the latch post within a year, or you build custom. We measure first, every time. If an off-the-shelf gate fits your opening and your budget, we will tell you. If it will not, we will show you the fabrication price and explain why it is the right call.
Salt-laden marine air accelerates rust on bare steel, especially at welds, drilled holes, and hinge barrels. For homes within about a mile of the coast, we recommend galvanized steel with stainless hinge pins and hot-dipped brackets. Powder-coated mild steel is cheaper, but it starts failing by year three or four. On a custom gate, the coastal spec usually adds 15 to 30 percent to the material cost. It typically doubles or triples the gate’s service life. Call (424) 757-9824 for a material-specific quote on your gate.
Yes. Any automatic gate must comply with UL 325 safety standards, which means photo-eyes positioned to detect an obstruction across the full travel path, correct force settings, and, where required, safety edges. We test every operator install before we leave and document the result. If the check does not pass, the job is not done. This is not an upsell. It is the law and the minimum safety standard.
Because the hinge carries the full gate weight every time it opens, and on a sagging gate, the hinge post becomes the fulcrum for all the stress. In Lomita’s coastal environment, rust at the hinge barrels and weld joints weakens that area faster than the rest of the frame. The crack at the hinge post means the metal failed where the load concentrated. A properly spec’d replacement uses heavier wall steel at the hinge stile, stainless hinge hardware, and a post footing deep enough to hold plumb. Call (424) 757-9824 and we can assess whether your existing gate is worth repairing or needs replacement.
Call Carver Gate Repair Torrance for Gate Installation in Lomita
We serve all of Lomita, from homes near Lomita Park to the neighborhoods off Narbonne Ave and Western Ave, from original 1940s bungalows to the 1970s ranch styles on the east side. The salt air, the strict set-back rules, and the non-standard post spacing are not surprises to us. They are the job. We measure every opening, quote every price in writing before work starts, and stand behind every repair for a full year under The Garrison Standard. Our tech just finished a swing gate install on a 1953 home near Lomita Park where the original 16-foot opening had non-standard 40-inch hinge post spacing. We fabricated a custom galvanized steel gate, set new 6×6 posts with deeper footings to dodge the salt-rotted old ones, and mounted a LiftMaster LA400 with stainless hinge pins and hot-dipped brackets. The UL 325 photo-eye test passed on the first try, and the owner did not have to book a second visit. That is the standard we hold on every job in Lomita. Call (424) 757-9824 for a free estimate, and a real person will answer.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance, serving Lomita and the South Bay.