Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lomita, CA
Lomita gate work runs on two realities: aging 1940s-to-1970s gates that have outlasted their hinges, and a city code department that enforces setback, height, and material rules with unusual precision. We’re Carver Gate Repair Torrance, and our crews work Lomita every week. When a 1950s iron gate rusts through at the post or a swing motor quits on a slope off Palos Verdes Drive, the fix usually requires more than a part swap. Call (424) 757-9824 and you’ll reach a live person who can schedule a technician to look at the actual gate, not just a photo of it.
Why Lomita Homes Are Different
Lomita’s housing stock is dominated by single-family homes built between the 1940s and 1970s. Many still have their original gates, which means we regularly work on iron and chain-link systems that were installed before modern gate motors existed. The marine layer that settles over Lomita most mornings keeps moisture on metal surfaces far longer than homeowners realize. That moisture works its way into hinge pins, latch mechanisms, and the bottom rails of iron gates, producing rust that eventually seizes moving parts or rots the metal entirely.
The city’s fence and gate ordinances add another layer. Lomita enforces specific setback, height, and material requirements, which means a replacement gate that would pass inspection in Torrance or Harbor City may not pass here. We know which permits apply and what the inspector will check, because we’ve gone through the process enough times to anticipate it. The Santa Ana winds, when they arrive, put lateral strain on swing gates and knock chain-link tension out of adjustment. None of this is exotic. It’s just Lomita being Lomita, and it shapes every repair we quote here.
Styles & brands we work with
Our Main Lomita Services
The two calls we get most from Lomita homeowners are for sagging or rusted gates that need repair and for installations that have to pass the city’s code requirements. Here’s what each involves locally.
Gate Repair in Lomita
Most Lomita repair jobs start with one of two problems: a gate that drags on the ground or one that won’t latch. Dragging usually means a hinge post has shifted or a hinge has worn out. A no-latch is often a striker misalignment caused by years of settling. Because so many original Lomita gates have non-standard post spacing, we often fabricate or modify hardware on site rather than forcing an off-the-shelf part to fit. The aim is a gate that swings true and latches without lifting, which is what the 365-Day Done Right Promise covers. Gate Repair in Lomita is our most requested service, and the page explains pricing, same-day availability, and what a repair includes.
Gate Installation in Lomita
New gate installations in Lomita come with a code-compliance step that other cities don’t require as strictly. Height limits, setback from the sidewalk, and material restrictions all factor into the design before we order anything. Because many Lomita properties have narrow side yards and older concrete walkways, we measure carefully and confirm the swing path clears any grade changes. A poorly fitted gate on a sloped driveway will bind immediately, and that’s the kind of thing we prevent with a site walk before any fabrication starts. Gate Installation in Lomita covers the full process, from permits to final adjustments.
Gate Motor Repair in Lomita
Lomita’s moisture gets into control boards and limit switches more often than people expect. A motor that worked fine in October may refuse to respond after a few weeks of morning fog if the housing isn’t sealed correctly. We stock parts for LiftMaster, FAAC, and Elite systems, and our technicians arrive with diagnostic meters and common wear items in the van, so most motor repairs happen in a single visit. If the operator itself has failed, we quote a replacement before touching anything. Gate Motor Repair in Lomita has the full breakdown on motor costs, brand coverage, and our written guarantee.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lomita
Our Lomita trucks carry parts and know-how for Elite, Mighty Mule, LiftMaster, and FAAC systems, among others. We keep common limit switches, remotes, and receiver boards stocked for local turnarounds, and we can order deeper parts from our brands network when a control board or articulating arm needs replacement. Most repairs are matched to the brand already on the property, so the electronics talk to each other the way they were designed to.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lomita, CA
| Service | Typical range in Lomita |
|---|---|
| Hinge replacement (welded or bolted) | $180 – $340 |
| Gate post reset or replacement (single post) | $220 – $450 |
| Weld repair on iron gate frame | $140 – $300 |
| Chain-link gate re-tension and hardware | $120 – $220 |
| Latch or lock replacement | $85 – $190 |
| Gate motor replacement (swing operator) | $650 – $1,450 |
| Gate motor replacement (slide operator) | $800 – $1,700 |
| Limit switch repair | $130 – $260 |
| Loop detector replacement | $160 – $320 |
| Remote or keypad programming | $70 – $140 |
| Full gate installation (single swing, iron) | $1,800 – $4,500 |
| Full gate installation (sliding, steel frame) | $2,500 – $5,800 |
What pushes a Lomita quote higher is the same thing that defines the market: non-standard post spacing on older homes, extra code compliance work, and rust-related frame repair that surfaces once the gate is open. The price we quote before work starts is the price you pay, because the number is written down before the technician picks up a tool.
Neighborhoods We Serve in Lomita
Our Lomita calls come from every part of the city, from the older blocks near the railroad tracks to the hillside streets closer to Rolling Hills. The mix of original 1950s gates and newer installations means no two routes look alike.
- Lomita Fields area
- North Lomita, near Palos Verdes Drive
- Western Lomita, toward the San Pedro border
- Neighborhoods near Lomita Park
- The residential streets around Eshelman Avenue
In most cases we can have a technician to a Lomita address within one business day, with emergency dispatch available for a gate that won’t secure.
Service Area – Cities Near Lomita
Carver Gate Repair Torrance handles gate work across the South Bay. If your property sits just outside Lomita, we also serve Harbor City, CA, Torrance, CA, Carson, CA, and Rancho Palos Verdes, CA. The same pricing policy, written guarantee, and 24/7 live phone coverage apply in every one of these areas.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lomita
Most Lomita calls are scheduled within one business day. For a gate that won’t close or secure, we dispatch on an emergency basis and a live person answers the phone 24/7 at (424) 757-9824. The dispatcher will confirm the nearest available window and give you an arrival estimate before you hang up.
Many gate installations in Lomita do require a permit, and the city enforces its height, setback, and material rules more strictly than most surrounding areas. We’ll confirm what’s needed for your property before any fabrication begins. Repairs that keep the existing gate footprint and do not change height or materials typically fall outside the permit requirement, but we verify every job against current code.
Yes. When you call (424) 757-9824, the dispatcher can note your preference and route the same technician when scheduling allows. Many Lomita homeowners with older gates also ask us to check hinge wear and rust while we’re already on site for a motor issue, and we’ll quote any additional work before doing it.
If you’re tired of gates that drag, motors that ignore the remote, or quotes that change after the work starts, call Carver Gate Repair Torrance at (424) 757-9824. We’ll give you a written price before any work begins, and every repair comes with our 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.