Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Torrance, CA
A pedestrian gate in Torrance typically costs between $450 and $2,800 installed, depending on whether you’re hanging a simple walk-through gate or adding a keypad, intercom, or electric strike. Most residential installs take one day from dig to final swing test. We’re Carver Gate Repair Torrance, and we handle pedestrian gates the same way we handle every Gate Installation in Torrance: written price before work starts, background-checked technicians on site, and a guarantee in writing that runs a full year.
Pedestrian gates are the gates people actually use every day. The driveway gate gets the opener and the remotes, but the walk gate is the one that gets opened a dozen times a morning: the gardener, the dog walker, the kids leaving for school, the delivery driver. A pedestrian gate that sags, sticks, or won’t latch is a daily annoyance, and in a city like Torrance with its coastal air and morning marine layer, the wrong hardware corrodes faster than homeowners expect. Lonnie Burke and our crew offer Gate Installation services for pedestrian gates built for that daily use, with hardware matched to the local climate and the hinge loads the gate actually carries.
We work on swing gates and sliding pedestrian gates, new installs and replacements, and we tie them into existing access control when the house already has a gate motor or keypad system. If you need a walk gate added next to a driveway gate, or you’re replacing a rusted-out gate that’s been dragging on the concrete for years, call (424) 757-9824 and a live person answers. That’s not a routing menu.
When You Need Pedestrian Gate
Most Torrance homeowners call us when a gate has already failed in a way they can describe with their hands. Here’s what usually triggers the call:
- The gate drags or scrapes the ground. Hinges wear, posts shift in the soil, and the latch side drops. In the clay-heavy ground of South Torrance and Walteria, posts settle unevenly after wet winters, and a gate that cleared fine in August scrapes by February.
- The latch won’t catch. A gate that won’t stay closed is a gate that bangs in the wind or swings open on its own. Coastal gusts off Santa Monica Bay put real force on a walk gate, and a worn latch or misaligned strike plate turns every windy afternoon into a slamming session.
- Rust and corrosion on the frame. Salt air within a few miles of the coast, like in Seaside or Hollywood Riviera, eats through untreated steel fast. Powder-coated aluminum holds up far better out here, and we spec it accordingly.
- You’re adding a walk gate to an existing driveway. Plenty of Torrance homes built in the 1950s and 60s have a driveway gate but no pedestrian access. If family members are squeezing through a gap or walking around the block to get in, a dedicated walk gate fixes it.
- A landlord or code requirement pushes replacement. Rental properties and multi-unit lots sometimes need a properly latched, self-closing pedestrian gate to meet local safety expectations. We install gates that close reliably every time, with hardware built for frequent use.
- You want keyed or keypad entry on the walk gate. A mechanical keyed lock works, but many Torrance homeowners want a keypad or intercom so the walk gate works with the same access system as the driveway. We install and wire those systems to match.
Our Pedestrian Gate Process
We follow the same sequence on every install, so there’s no surprise about what happens on site. The Garrison Standard sets the order of operations, and it doesn’t change from job to job.
- Site walk and measurements. We check the post condition, the gate opening width, the swing path, and the ground slope. If the existing posts are steel set in concrete and they’re still plumb, we can often reuse them and save you the cost of new footings. If they’re rotted wood or leaning, we tell you on the spot.
- Written quote before any work starts. The number we write down is the number you pay. It covers the gate, hardware, labor, and any access control wiring. It doesn’t change when the crew shows up, and it doesn’t grow halfway through the day.
- Post set and gate hang. New posts go into concrete footings sized for the gate weight and the wind load. We hang the gate on adjustable hinges so the reveal is even and the latch side clears properly. A pedestrian gate should swing with one hand and stop exactly where you let go.
- Hardware and access control. Latch, closer, keypad, intercom, or electric strike: we install what the job calls for and test it in front of you. If the gate ties into an existing LiftMaster or FAAC driveway system, we match the wiring and confirm the walk gate doesn’t interfere with the vehicle gate.
- Final test and site clean. We open and close the gate twenty times, check the latch tension, and confirm the closer speed is right. The work area is left free of concrete bags, cut hardware, and stray fasteners. You walk the gate before we leave.
Every pedestrian gate install ships with our home team’s standard guarantee: a written 365-day Done Right Promise. If anything fails inside that year, we return and fix it at no charge. No argument, no invoice.
Pedestrian Gate Pricing in Torrance
Pedestrian gate pricing in Torrance breaks down into a few clear buckets. Here’s what we see across the South Bay, based on the jobs we quote and complete:
| Scope | Typical Torrance Range | What It Includes |
|---|---|---|
| New walk gate, standard steel frame | $450 – $900 | Site measure, gate fabrication or stock gate, hinge and latch hardware, hang and test |
| New walk gate, powder-coated aluminum | $800 – $1,600 | Corrosion-resistant frame, upgraded hinges, closer, latch, full install |
| Wood pedestrian gate, custom | $700 – $1,500 | Custom-built to opening, sealed hardware, sag-resistant diagonal bracing |
| Pedestrian gate with keypad entry | $1,200 – $2,800 | Gate, electric strike or magnetic lock, keypad, wiring to power, programming |
| Gate replacement, existing posts reused | $500 – $1,100 | Demo of old gate, reuse of sound posts, new hardware, hang and test |
What moves the number on How Much Does Gate Installation Cost? (2026 Price Guide) - Torrance, CA: the gate material and finish, whether new posts and footings are required, the hardware class (a heavy-duty closer costs more than a basic spring), and whether access control gets wired in. Aluminum costs more up front than steel, but for homes west of Hawthorne Boulevard within reach of the salt air, it’s the better call long-term. Steel rusts; aluminum doesn’t.
We give a written price before any work starts. The estimate is free, and it’s the exact number you’ll see if you approve the job. Call (424) 757-9824 and we’ll set a time to measure and quote.
Can a pedestrian gate be motorized?
Yes. A swing or sliding pedestrian gate can be fitted with a dedicated operator, and we install and service motorized pedestrian gates across Torrance. Many homeowners wire the walk gate to a keypad or intercom, and some use a separate remote on a Mighty Mule or Elite pedestrian operator. The operator mounts to the gate post and frame, pulls from a dedicated circuit, and includes a manual release for power outages. For a gate that swings clear and latches reliably, motorization is straightforward; for a gate dragging on the ground or sagging on worn hinges, the operator will fight the gate every cycle and fail early. We fix the gate first, then add the motor.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Torrance?
A pedestrian gate in Torrance typically costs between $450 and $2,800 installed, with most standard steel or aluminum walk gates landing between $600 and $1,400. The spread comes down to material, finish, post condition, and whether access control like a keypad or intercom is included. Call (424) 757-9824 for a written quote, free of charge.
How long does pedestrian gate installation take?
Most pedestrian gate installations in Torrance are completed in one day. If new concrete footings are poured, the gate gets hung the following day once the concrete has cured enough to hold the post loads. Wood custom gates may add fabrication time, but stock or fabricated metal gates typically go in same-day.
Should I repair my existing pedestrian gate or replace it?
If the frame is sound and the problem is a worn latch, a sagging hinge, or a misaligned strike plate, repair is usually the better call and costs less than $300 in most Torrance cases. If the frame is rusted through, the posts are plumb-busted, or you’re replacing hardware for the third time, replacement is the more honest option. We’ll tell you which one applies after the site walk, not before.
Do you install pedestrian gates with keypads or intercoms?
Yes. We install pedestrian gates with keypad entry, card readers, intercom systems, and electric strikes, and we wire them to work alongside existing LiftMaster or FAAC Driveway Gate systems. The access hardware gets programmed on site, and the whole walk-gate entry is tested before we leave.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance, serving Torrance.