Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Torrance, CA
A driveway gate installation in Torrance typically runs between $4,200 and $11,500 for a complete system with motor, gate, and control hardware, while a gate alone without automation lands closer to $2,800 to $6,000. Most installations take one to two full days on site, depending on whether we’re working with a single swing arm, a dual swing setup, or a sliding gate track. Carver Gate Repair Torrance handles the entire job from concrete work to final sensor alignment, and you’ll have a written price before any material gets ordered.
Driveway gates in Torrance aren’t a one-size job. The city’s mix of 1950s ranch homes in Southwood, newer builds on the hillside, and gated communities near Del Amo all present different gate configurations. Some driveways slope enough to require a sliding gate instead of a swing. Others have concrete pillars already poured from an old gate that gave out years ago. We start every job by looking at what’s actually there, not what a catalog says should work.
This work falls under our broader Gate Installation service, and it’s where we spend a good portion of our week. You can reach us at (424) 757-9824 to talk through what you have in mind. A real person answers, any hour.
When You Need a Driveway Gate
Not every call we get is for a brand new gate. Some Torrance homes have an old gate that’s been leaning for years, or a motor that died and now the gate just sits at the edge of the driveway doing nothing. Here are the situations that usually mean it’s time to call us:
- The gate sags or scrapes the driveway when it opens. That’s usually a hinge or post problem, and ignoring it damages the motor over time. In the hills above PCH, with moisture from marine air, wood posts rot faster than people expect.
- The motor runs but the gate doesn’t move. Often a gear or chain issue inside the operator. If you hear the motor whining, don’t keep pressing the remote. Call, and we’ll diagnose it.
- You’re buying a home that has a dead gate. A lot of Torrance properties sell with non-functioning gate systems. Buyers want a working gate before move-in, and sellers want it done before closing.
- Security is the reason you’re doing this, not convenience. Homeowners along Hawthorne Boulevard and Western Avenue get tired of drive-through traffic off the main drag. A gate gives your property a hard boundary.
- The gate is flimsy or was a DIY job. A gate that wobbles on light hinges or has a cheap chain-drive opener is a liability. We replace a lot of installations where someone saved money the first time and it failed inside two years.
- You need vehicle access control, not just a gate. Intercoms, keypads, and loop detectors for automatic opening are all part of a proper driveway gate install in Torrance.
Our Driveway Gate Process
Here’s exactly how a driveway gate job runs with Carver Gate Repair Torrance, from first phone call to final walkthrough:
- Inspection and site measurement. We measure the driveway opening, check the grade, look at what’s under the existing concrete or pavers, and note any utility lines. If there’s an old gate or post, we assess whether any of it can stay. This visit has a written proposal attached to it, not a verbal ballpark.
- Design and written price. You get a line-item quote for the gate material, motor type (swing, slide, or barrier), control hardware, concrete work, and labor. The number on that paper is the number you pay. No adjustments at the door, no “found something unexpected” markups. If we find a genuine surprise during the work (old concrete that’s thicker than expected), we stop and explain it before touching anything.
- Concrete and structural prep. For swing gates, we pour new footings sized for the gate weight. For sliding gates, we set the V-track and guide rollers. In Torrance, where yards often have compacted clay soil, we dig footings a bit deeper to prevent shifting when the ground swells after rain.
- Gate hang and motor install. The gate gets hung on heavy-gauge hinges or mounted on the sliding track, then the motor goes in. We work on Gate Installation in Torrance systems every week, so the motor gets matched to the gate weight. The brands we see most often here are Elite and LiftMaster, but we install and service FAAC and Mighty Mule as well.
- Sensors, controls, and safety check. Every gate gets a photo-eye or loop detector so it won’t close on a car or a person. We set the force limits on the motor, test the remote range, and verify the auto-reverse. This is where most cheap installs fail, and it’s why we test each function three times before we call the job done.
- Walkthrough and paperwork. You get a demonstration of every function, the remote programming, and your written guarantee. The guarantee covers our workmanship and the parts we install for a full year. If anything fails inside that year, we come back and fix it without charging you a second visit fee.
Driveway Gate Pricing in Torrance
Here’s what driveway gate work costs in Torrance, with the ranges we quote most often:
- Single swing gate, no motor: $2,800 – $5,200
- Single swing gate with motor: $4,200 – $7,000
- Dual swing gate system with motor: $6,500 – $11,500
- Sliding gate with motor: $5,800 – $10,500
- Motor-only replacement on existing gate: $850 – $1,900
- Concrete and footing work: $700 – $1,800 depending on existing slab condition
- Keypad, intercom, or loop detector add-on: $300 – $1,100
What moves the price? Gate material is the biggest factor. A basic steel gate in a standard 12-foot opening costs far less than a custom aluminum gate across a 20-foot dual driveway. Motor choice matters too. A LiftMaster swing operator runs differently than a heavy-duty FAAC hydraulic arm, and the FAAC is the right call for a heavy wood gate on the hillside. Permit requirements also come into play. Some Torrance neighborhoods with HOA rules require specific gate styles or materials, and we’ll help you sort that before ordering anything.
We give you a written price before any work starts. That’s the policy, not a courtesy. Call (424) 757-9824 and we’ll send a technician out to measure and quote your driveway gate. The estimate is free.
FAQs – Driveway Gate
How much does a driveway gate cost in Torrance?
A complete driveway gate with motor in Torrance typically costs $4,200 to $11,500, with the price set by gate width, material, motor type, and whether we need to pour new footings. A gate without automation runs $2,800 to $6,000. Call (424) 757-9824 for a written quote based on your specific driveway.
Can you install a driveway gate the same week?
In most cases, yes. Once you approve the written proposal and the gate is in stock, we schedule the install within the same week. Custom gate orders may take 2 – 4 weeks for fabrication. We’ll tell you the timeline before you commit to anything.
Is it cheaper to repair or replace a driveway gate?
If the gate structure is sound, repairing or replacing the motor ($850 – $1,900) is far cheaper than a full replacement. If the gate sags, the hinges are pulling out, or the posts move, a new installation often costs less long-term than repeated patch jobs. We’ll give you both options with written prices and let you decide.
Do you work on existing driveway gates, not just new installs?
Yes. A good portion of our Torrance work is repairing and retrofitting existing driveway gates. If you have an old gate that stopped working, we’ll inspect the hinges, track or posts, and motor, then quote you a repair or replacement. The free second visit inside the guarantee window applies to repair work too.
What brands do you install on driveway gates?
We install and program motors from Elite, LiftMaster, FAAC, and Mighty Mule, among others. The right motor depends on your gate weight and how often it cycles. We’ll match the operator to the gate rather than selling you whatever is on the truck. Call (424) 757-9824 with your current motor model if you want to know if it’s compatible with a new gate.
Does a driveway gate raise home insurance rates in Torrance?
No. A properly installed driveway gate with safety sensors generally doesn’t affect insurance premiums, and some carriers view vehicular access control as a security feature. If your insurer asks for documentation on the gate’s safety compliance, we provide the installation details and sensor test results.
Get a Written Price on Your Torrance Driveway Gate
Every driveway gate we install in Torrance starts with a written price and ends with a written one-year guarantee. If you’re tired of vague quotes and contractors who disappear after the deposit, call Carver Gate Repair Torrance at (424) 757-9824. A background-checked, uniformed technician will measure your driveway, explain your options in plain language, and hand you a number that doesn’t move. We answer the phone around the clock, every day of the year, and we show up when we say we will.
Ready to talk about your driveway gate? Call (424) 757-9824 now for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance, serving Torrance.