Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Manhattan Beach
A new driveway gate in Manhattan Beach typically costs $4,800 to $14,000 installed, depending on the gate width, material, and operator system. A pedestrian gate runs $1,900 to $4,600. We schedule a site measure within a few business days, deliver a written price before any work starts, and the number does not move at the door. Call (424) 757-9824 for a free estimate.
Manhattan Beach is not a one-size-fits-all gate market. Homes in the Hill Section and along the Strand are built with heavier custom gates, automation, and materials that have to stand up to salt air. Original beach cottages in the sand section need lighter retrofits that don’t fight the original architecture. We plan each installation for the specific soil, exposure, and gate weight on that property, not off a catalog page.
Why Carver Gate Repair Torrance Is Manhattan Beach’s Preferred Gate Installation Company
Carver Gate Repair operates to The Garrison Standard, the operating code of the Garrison Partners family in place since 2008. That means every installation gets a written price before the first hole is dug, a written 365-Day Done Right Promise on the completed work, and a background-checked, uniformed technician on site. If the gate fails inside the guarantee window, the second visit is free. No charge, no argument.
For Manhattan Beach homeowners, the crew that matters is the one that knows what this coastline does to a gate. Our technicians work with stainless and powder-coated hardware as standard practice near the water. They know which post footings will hold in sandy soil and which operator brands handle salt spray without freezing up. The dispatch and scheduling are coordinated from the brand’s Los Angeles office, and crews serve Manhattan Beach locally. Phones are answered by a live person 24/7, including weekends and holidays, at (424) 757-9824.
Styles & brands we work with
Sliding Gate Installation in Manhattan Beach
Sliding Gate Installation in Manhattan Beach usually runs $6,000 to $16,000 and is the right choice when a driveway slopes up from the street or when a swing gate would need to open out over a sidewalk. A slide gate rides on a track or cantilever system and does not require the wide arc of clearance a swing gate needs. In Manhattan Beach, many hillside driveways leave no room for a swing arc, so sliders are the practical option.
Track and Cantilever Systems
Track-mounted sliders are easier to install but the track can clog with sand and debris near the beach. Cantilever sliders ride above the ground and need no track, which makes them the better long-term choice for coastal lots that collect wind-blown sand. We can specify either system once we see the driveway slope and gate weight.
Hardware That Holds Up Near Salt Air
Standard steel rollers and track wheels rust fast in Manhattan Beach’s ocean moisture. We use stainless steel or sealed-bearing rollers and a corrosion-resistant rack and pinion system on every coastal slide gate we install. It costs more up front than big-box hardware, but it prevents the seized rollers and binding that shortens a gate’s life by years.
Gate Opener Installation in Manhattan Beach
Gate Opener Installation in Manhattan Beach typically runs $1,800 to $4,500 for the operator, mounting, and programming. This covers retrofitting an existing gate or pairing a new operator with a new gate. Manhattan Beach homeowners deal with a lot of custom ornamental gates, and the operator has to be matched to the gate’s weight, the driveway slope, and the salt environment or it fails early.
Matching Operators to Heavy Custom Gates
A 16-foot ornamental steel gate in the Hill Section can weigh 600 pounds or more. An underpowered operator from a hardware store will strain itself to early death. We size operators by the real gate weight and duty cycle, and we stock units from LiftMaster, FAAC, Elite, and Mighty Mule at the Los Angeles dispatch office so parts reach Manhattan Beach without days of waiting.
Trenching, Power, and Loop Detectors
New operators need a power run from the house or an isolated branch circuit at the gate post, plus underground loop detectors or photoelectric safety edges for entrapment protection under UL 325. We handle the full electrical scope, including the trenching and conduit, so the homeowner is not coordinating an electrician on top of a gate crew. Every job includes a written price before our technician opens the trench.
Trusted Brands We Service in Manhattan Beach
We train our technicians on nine gate motor brands, including LiftMaster, FAAC, Elite, and Mighty Mule, because Manhattan Beach homes arrive with every brand imaginable. Some were installed by the builder, some by a previous owner, and some by a landscape contractor who never touched a gate again. Our Gate Installation team carries the common boards, remotes, and limit switch parts for the brands we see most often, which means fewer second trips and shorter lead times for Manhattan Beach customers.
Common Gate Installation Problems We See in Manhattan Beach Homes
- Sagging hinge posts in sandy soil. The tree section sits on sand that shifts seasonally. Undersized post footings lean within a few seasons, and heavier custom gates pull the post out of plumb. We set footings deeper than standard and use rebar cages where the soil is loose.
- Rusted rollers and hinges near the Strand. Salt spray gets into everything. Uncoated steel hardware binds and the gate starts dragging. We specify stainless or powder-coated hardware on any property within a few blocks of the ocean.
- Misaligned entrapment sensors on custom gates. High-end properties with heavy pedestrian traffic need photoelectric edges and loop detectors that actually work. We see plenty of UL 325 violations on gates installed by general contractors. A misaligned sensor turns a gate into a hazard.
- Automation retrofitted onto original beach cottages without reinforcement. A 1920s-era gate frame was never engineered for an operator. Adding a motor without reinforcing the frame and post leads to twisted hinges and a gate that jams. We build the retrofit around the original look, but the structure gets upgraded.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Manhattan Beach, CA
Here are honest numbers for the Manhattan Beach market. A standard pedestrian gate runs $1,900 to $4,600. A sliding driveway gate lands between $6,000 and $16,000 depending on width and finish. A swing gate runs $4,000 to $9,500 for a double-leaf custom install. Gate opener installation adds $1,800 to $4,500 on top of the gate itself. Custom ornamental work in the Hill Section runs higher because the fabrication is bespoke and the hardware must be marine-grade. Every estimate is free, written, and delivered before work starts. Call (424) 757-9824 and we will put a number on paper.
In the Hill Section of Manhattan Beach, we installed a custom 16-foot sliding gate with a LiftMaster operator and underground loop detector at a modern coastal home. Because the gate faces west with salt spray, we used a stainless steel rack and pinion system and powder-coated the gate frame before setting the post footings deep into the sandy soil to prevent future sag. That job is the standard for what we do here, not the exception.
We Also Serve Cities Near Manhattan Beach
Carver Gate Repair Torrance covers the broader South Bay, including Manhattan Beach, Hawthorne, Redondo Beach, Inglewood, and Playa Vista. If your property sits on the edge of one of these cities or you own a second home nearby, the same crew and the same Garrison Standard apply. Dispatch is the same live-answer line.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Manhattan Beach
Gate post footings in Manhattan Beach’s sandy soil should go 36 to 48 inches deep and 18 to 24 inches in diameter, with a rebar cage for heavier custom gates. The sand section and tree section drain fast and shift with moisture, so a shallow footing leans within two or three seasons. We over-excavate, use compacted gravel at the base, and set posts in concrete that surrounds a rebar core so the hinge post does not move under a 500-pound gate. A one-size footing from a standard install guide will not hold in this soil. Call (424) 757-9824 and we will check your soil before quoting.
Only if it is built for it from the start. A custom ornamental gate near the Strand needs stainless steel or powder-coated hardware, sealed bearings in the hinges and rollers, and a finish that is reapplied before any rust blooms. Untreated steel starts rusting inside a year in Manhattan Beach’s salt spray. We specify marine-grade finishing on every gate within a few blocks of the ocean, and the 365-Day Done Right Promise covers the gate if anything corrodes inside the first year.
Yes. We keep the original gate face and automate it with a discreet operator mounted at the post or below grade, preserving the cottage’s original curb appeal. The frame and hinge post usually need reinforcement behind the scenes, because a 100-year-old gate was never built for a motor. The visible side stays unchanged. We have done this on original sand section cottages where the city’s design review board cares about streetscape character.
Yes, most new driveway gates in Manhattan Beach require a permit, especially when the gate is automated or the post footings involve new concrete and electrical. Manhattan Beach’s coastal development rules can also trigger design review for street-facing gates. A pedestrian gate usually needs less review than a driveway gate, but automation adds electrical requirements. We do not pull permits for customers, but we can provide the specs, drawings, and equipment lists your permit application needs. Ask us about this on the first call.
A commercial-duty slide gate operator from LiftMaster or FAAC sized to at least 1.5 times the gate’s actual weight works best for heavy custom slide gates in the Hill Section. Undersized residential openers burn out on 600-pound gates and steep driveways. We also recommend a cantilever slide design over a track-mounted one for hill section properties, because the track collects sand and debris. The operator gets paired with photoelectric safety edges and an underground loop detector for entrapment protection. Call (424) 757-9824 for an exact recommendation based on your gate’s weight.
We dispatch a technician to Manhattan Beach the same day for gate failures that leave a driveway blocked or a property unsecured, and we answer the phone around the clock at (424) 757-9824. A new installation is scheduled, not dispatched, because custom gates are built to order and require site measures, permits, and fabrication time. For repairs and emergency calls, same-day coverage is normal.
Contact Carver Gate Repair Torrance
If you’re planning a new gate or replacing one that has rotted, sagged, or stopped running, call (424) 757-9824. We’ll schedule a free on-site measure, deliver a written price, and walk you through exactly what the job involves. Written prices, background-checked technicians, and a full-year guarantee on every installation. The Garrison Standard applies to every job we take in Manhattan Beach.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance.