Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Compton
Gate installation in Compton typically runs $1,400 – $4,800 for a standard driveway gate and $2,800 – $7,500 when you add a motor and operator, with most jobs completed in one to three days once materials arrive. We schedule a free measurement and written quote before any work starts, so the number you approve is the number you pay. Call (424) 757-9824 and a live person answers, day or night.
Compton’s housing stock is older than most surrounding cities. Drive through the neighborhoods off Rosecrans or Alondra and you’ll see original wrought iron and chain-link gates that have been standing since the 1950s and 60s. Some of them are worth saving. Some are not. Our job is to tell you the difference honestly, in plain language, before you spend a dollar.
Why Carver Gate Repair Torrance Is Compton’s Preferred Gate Installation Company
We work in Compton every week, mostly on residential lots where the original gate has outlived its post, its hinges, or its operator. Homeowners here deal with a specific set of problems: morning marine layer moisture rusting posts at the base, dry summer heat cracking wood gates, and east side soot from the 710 freeway wearing rollers down faster than anywhere else in the area.
Every technician we send into Compton is background-checked, uniformed, and trained on nine gate-motor brands including LiftMaster, FAAC, and Elite. That matters when the operator on your gate is a 1990s model and the control board has no modern safety inputs. Our crew has seen it before and knows whether it can be retrofitted or needs replacing.
We answer the phone with a live person, 24 hours a day. No voicemail tree. No call-back queue. And every repair or installation carries the 365-Day Done Right Promise, written on the quote, so if something fails inside a year, the second visit is free. Lonnie Burke leads our crew, and he holds every job to The Garrison Standard: written prices, clean sites, and work that stays done.
Styles & brands we work with
Gate Installation Services in Compton
Gate Installation services in Compton cover everything from a new swing gate on a residential driveway to a sliding gate across a commercial lot off Alameda Street. The work includes removing the old gate when needed, setting new posts, hanging the gate square, and adjusting hinges and latches so the gate closes without binding. If your property has an existing operator, we match the new gate to it or swap the operator for a modern unit with current safety features.
Driveway and Pedestrian Gates
Most Compton homes have either a swing gate or a sliding gate at the driveway, and many also have a separate pedestrian gate. A standard single driveway swing gate runs $1,400 – $2,800 installed. A pedestrian gate is less, usually $600 – $1,200. Double gates, common on wider driveways, run $2,500 – $4,800 depending on material and hardware.
Sliding and Security Gates
Sliding gates make sense on Compton lots where a swing gate would block the driveway or hit a slope. These run $1,800 – $3,800 for standard steel or aluminum, more if the gate is heavy or needs a rack-and-pinion drive. Security gates, typically steel with a taller profile and a maglock or keypad, start around $3,000 and go up from there. We quote the exact price in writing before we order anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Compton
Electric gate installation in Compton takes a quality gate and adds the motor, control board, safety sensors, and wiring so it opens with a remote, keypad, or phone app. A basic electric swing gate with a LiftMaster or Mighty Mule operator runs $2,800 – $5,500. Sliding electric gates run higher, typically $3,500 – $7,500, because the motor and rack carry more weight.
Safety Sensors and Compliance
Every electric gate we install includes photo-eye sensors and edge protection that meet current UL 325 entrapment standards. Many Compton gates predate those rules. If you’re automating an existing gate or replacing an old operator, we flag what’s missing and include the safety hardware in the quote. We do not install electric gates without it.
Solar and Keypad Entry
For Compton lots where running conduit to the gate would mean cutting across a long driveway or landscaped yard, a solar operator often saves real money. A solar swing gate setup with a Mighty Mule operator runs $3,200 – $5,800. We also install keypads, intercoms, and vehicle loop detectors, and we explain the difference between a loop detector and a photocell in plain English before you choose.
Trusted Brands We Service in Compton
Carver Gate Repair works on nine gate-motor brands, including LiftMaster, FAAC, and Elite, because Compton homeowners didn’t all buy the same opener. Some gates still carry operators from the 1980s and 90s with obsolete control boards. We stock common replacement parts locally and source the rest through established supply channels, so a Compton job doesn’t stall waiting on a back-ordered board. If your existing operator is a LiftMaster, Mighty Mule, or Elite unit, our technicians arrive knowing how to match new equipment to it or replace it with something better.
Common Gate Installation Problems We See in Compton Homes
Older Compton houses share certain gate problems, and we see them often enough to know the patterns:
- Rotted posts at the footing. Post-WWII gate posts in Compton were set shallow and often without proper concrete collars. Decades of marine layer moisture rot the base, the gate sags, and panel-only repairs fail because the post is the problem. We replace the post, not just the panel.
- Obsolete operator boards. A 1980s or 90s gate operator is cheaper to replace than repair in most cases. The boards lack modern photocell inputs, and retrofitting an old board to meet UL 325 is more labor than installing a new LiftMaster or FAAC operator. We tell you that up front.
- 710 freeway soot and vibration. On Compton’s east side near the freeway, diesel soot coats rollers and hinges, and constant vibration loosens hardware faster than in neighboring cities. Gates there need sealed bearing rollers and reinforced hinge posts, or they fail early.
- Wrought iron rust-through. Compton’s morning marine layer encourages surface rust, but near the 710 corridor it can go deeper. We see slide-gate derailments and rack teeth stripped by rust-expanded hardware. Sometimes the fix is a new gate; sometimes it’s worth repairing. We show you the difference with the gate in front of you.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Compton, CA
Here’s what gate installation in Compton realistically costs:
- Pedestrian gate: $600 – $1,200
- Single driveway swing gate: $1,400 – $2,800
- Double driveway gate: $2,500 – $4,800
- Sliding gate, no motor: $1,800 – $3,800
- Electric swing gate with operator: $2,800 – $5,500
- Electric sliding gate with operator: $3,500 – $7,500
- Security gate with keypad or maglock: $3,000 – $6,500
Material choice, gate width, post depth, and operator brand all move the number. A wood gate costs less than steel up front but needs more maintenance in Compton’s dry summers. A steel gate near the 710 freeway wants sealed bearings and a reinforced post, which adds a few hundred. We measure, we quote, and the price is in writing before any work starts. Call (424) 757-9824 for a free estimate.
We Also Serve Cities Near Compton
Our Compton crew covers the surrounding area, including Carson, Lynwood, Torrance, and Harbor City. If your property sits near the Carson border or up against the 91, we can usually reach you the same day for an assessment. Scheduling is coordinated from our Los Angeles office, and crews serve Compton locally.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Compton
Yes, in many cases we can retrofit a 1960s swing gate with a modern LiftMaster or Mighty Mule operator, as long as the gate itself is structurally sound and the hinge post can support the added movement. If the post is rotted at the footing or the gate frame is rusted through, replacement is often cheaper than trying to brace an old gate. We’ll tell you which answer applies to your gate during the free measurement. Call (424) 757-9824 to schedule one.
Yes. All automatic gate operators installed in Compton must comply with UL 325, which requires photo-eye sensors and secondary entrapment protection like edge sensors or current-sensing reversal. A gate installed before UL 325 took effect may not have these, and an old 1990s operator often cannot be retrofitted to meet the standard. We include the required safety hardware in every electric gate installation quote.
Diesel soot from the 710 freeway corridor settles on rollers and hinges, mixes with morning marine layer moisture, and forms an abrasive paste that accelerates wear. Constant vibration from heavy truck traffic also works bolts loose and stresses the rack-and-pinion. On east side Compton gates, we use sealed bearing rollers and reinforced hinge posts, which last significantly longer than standard hardware.
For a standard 6-foot gate, a new hinge post should be set at least 36 inches deep in concrete below grade, with the footing diameter wider than the post. Compton’s soil is largely clay, which moves with rain and drought, and a shallow footing shifts over time. We set posts at 36 inches or deeper on every installation, and deeper still for heavy steel or commercial gates.
Yes. Chain-link gates are light enough that a solar opener like a Mighty Mule works well, especially on Compton lots where running power to the gate would mean trenching across a long driveway or through concrete. A solar swing gate setup on an existing chain-link gate typically runs $3,200 – $5,800 including the panel, battery, and operator. Call (424) 757-9824 and we’ll assess your gate and sun exposure for free.
Call Carver Gate Repair Torrance for Gate Installation in Compton
If your Compton gate is sagging, rusted, or running on an operator from the last century, we’ll measure it, quote it in writing, and install it right. Lonnie Burke and our crew work to The Garrison Standard every job: background-checked technicians, written prices, and a 365-Day Done Right Promise on the work. Call (424) 757-9824 now for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair Torrance, serving Compton and surrounding cities.